2000ltr Vertical Emergency Tank Shower - SE-VTS-1
1590mm x 1480mm x 3930mm H


An emergency tank shower for use where a constant water supply or adequate water pressure is unavailable, this emergency safety shower is fully compliant with ANSI Z358.1 providing a guaranteed 15 minutes of water flow.

ANSI Z358.1 requires that shower valves be of simple operation, turning from off, to on in one second or less, and providing hands-free operation once activated. Self-closing shower valves do not meet the ANSI standard and should be replaced.

Supported on a 40mm x 40mm x 3mm hot dip galvanised (provides corrosion protection) carbon steel, square tubular frame with bolt down fixing brackets, the moulded polyethylene 2000ltr water tank is covered in 40mm reflective Kingspan Thermapitch® TP10 rigid polyurethane foam, insulation board (0.022Wm.k thermal conductivity) and the tank structure is further protected by a shroud complete with warning signage. The heating element sits in a sump to ensure it is covered even if the tank is completely empty and the unit is fitted with a test activation handle which is accessed from outside the shower area.

Dimensions: 1590mm x 1480mm x 3930mm H (overall height)
Weights: 672kg un-laden & 2,872kg filled
Heating: 2.25″ BSP, 230v 3kw rated, wired to rotary isolation switch
Tank capacity: 2000ltr
Flow rate: 75.7lpm over 15 minute duration
Shower head: Polished stainless steel
Wetted parts: Manufactured from non-ferrous materials
Test activation handle: Fitted outside the shower area
Visual water level indicator: Fitted on front face of tank shroud

Related Resources